Mobilmet 760 series
Mobilmet? 760 Series are extra high performance neat cutting oils. They are chlorine-free and are intended for severe cutting operations especially on difficult to machine steels. Mobilmet 760 Series oils are not recommended for use with copper and it's alloys due to its aggressiveness towards these softer yellow metals. In comparison with other leading premium cutting oils, Mobilmet 760 Series oils have demonstrated superior surface finish, extended tool life and control of built-up edge. Their light colour enables the work area to be seen during machining operations. Closer tolerances are consistently achieved. The oils are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment.
With the benefit of comprehensive development testing using modern machining equipment, plus extensive customer evaluations, Mobilmet 760 Series products, have become the products of choice for many machine shops.
Features and Benefits
The Mobilmet brand of cutting fluids has gained a well-deserved reputation for innovation and outstanding performance over the years. The Mobilmet 760 Series are an important member of this family with their chlorine-free and low-misting additive technology. This formulation approach yields superb performance in a wide range of applications, while providing the environmental and disposal benefit of being chlorine-free.
Additional features and potential benefits of Mobilmet 760 products include:
Features
Advantages and Potential Benefits
Superb machining performance
Increased production resulting from longer tool life and reduced downtime for tool changes
Improved surface finish, closer tolerances and reduced formation of built-up edge resulting in fewer rejects
Excellent lubricity
Cooler work pieces and increased feed rates possible for reduced operating costs
Broad multi-purpose capability
Suitability for a wide range of severe machining operations on difficult steels
Light transparent colour
Provides a clear view of the tool and work piece
Anti-mist formulation
Improved workplace safety
Applications
Mobilmet 760 Series are recommended for severe cutting operations on normal and difficult to machine steels. Specific applications, by grade, include:
? Mobilmet 762 is particularly suitable for drilling, deep hole drilling (less than 20 mm diameter), threading, tapping, parting-off and automatic lathe operations on small work pieces
? Mobilmet 763 is recommended for deep hole drilling (greater than 20 mm diameter), drilling, tapping, threading, milling, gear shaping, broaching, parting-off and automatic lathe operations
? Mobilmet 766 is used for tapping, threading, milling, gear shaving and shaping, broaching, planing, parting-off and automatic lathe operations
Properties and Specifications
Property
762
763
766
Chlorine, ppm, ASTM D6443
NIL
NIL
NIL
Density @ 15 C, g/cm3, ASTM D4052
0.87
0.87
0.88
Flash Point, Cleveland Open Cup, �C, ASTM D92
160
180
205
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445
3.0
4.0
6.0
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445
10
18
36
Sulfur, Active, wt%, ASTM D1662
1.6
1.6
1.6
