Mobil SHC Cibus series
Our Mobil SHC Cibus? Series food machinery lubricants are designed to provide outstanding equipment protection, long oil life and problem-free operation in food and beverage processing and packaging applications. Manufactured in ISO 22000-certified facilities that also meet the requirements of ISO 21469, Mobil SHC Cibus Series lubricants ? which are NSF H1 registered ? are formulated to withstand high and low temperatures, high loading and repeated wash downs.
These hydraulic, compressor, gear and bearing oils meet stringent FDA requirements and are:
- Suitable for Kosher and Halal food preparation
- Formulated to be free of animal-derived materials
- Formulated to be free of allergens from nuts, wheat and gluten
Features and Benefits
The Mobil SHC brand of lubricants is recognised and appreciated around the world for innovation and outstanding performance. These molecular designed products based on synthetic materials symbolise the continuing commitment to use advanced technology to provide outstanding lubricant products. Not least among the benefits is the potential for efficiency improvements compared to mineral oils.
The Mobil SHC Cibus Series oils offer the following features and potential benefits.
Features
Advantages and Potential Benefits
NSF H1 registered lubricants
Allows use in food and beverage packaging and processing applications
Manufactured in facilities that are ISO 22000 certified and registered to ISO 21469
Product integrity assurance through independent verification.
High viscosity index
Maintains viscosity and film thickness at high temperatures to help protect equipment
Exceptional low temperature performance, including low power consumption at start-up
High load carrying capability
Helps protect equipment and extend life
Minimizes unexpected downtime and extends service periods
Good seal compatibility
Helps reduce potential oil leakage
Excellent oxidation stability
Provides long oil and helps extend equipment life
Excellent water separation and good corrosion protection
Helps prevent internal systems from corrosion even where large quantities of water are present
Maintains lubrication performance even after high pressure wash downs
Meets a wide range of equipment requirements
Multi-service applications - One product can replace several
Helps minimize inventory requirements and reduces potential for product misapplication
Applications
Handling and Storage Recommendations
It is recommended that Mobil SHC Cibus lubricants should be stored inside and segregated from other non NSF H1 lubricants. Ideally, they should be stored in a clearly signed, separate, designated inside area. Drums and pails should not be stacked below or above other non NSF H1 lubricants. New packaging should be free from damage with an unbroken seal. Record the delivery date, batch number and expiration date. Record the date of initial seal breakage and use the contents in time by suitable stock rotation. Close all package openings after use. Do not replace unused oil in the container. Use clearly labeled dedicated equipment for internal transportation. Label machinery with the name of the correct NSF H1 lubricant where appropriate.
Lubricant Changeover
While the Mobil SHC Cibus Series may be physically compatible with other NSF H1 or non NSF H1 registered mineral oil based products, a mixture may detract from their performance and also from their registration status. Consequently it is recommended that before changing systems from non H1 lubricants to the Mobil SHC Cibus Series, or even for brand new equipment, the system should be thoroughly cleaned out and flushed to achieve the maximum performance benefits and to comply with H1 registration.
Applications
Mobil SHC Cibus Series lubricants are recommended for use in a wide variety of hydraulic, compressor, gear and bearing applications within food and beverage processing, packaging and pharmaceuticals. The products are effective in many applications including those where maintenance costs of component replacement, system cleaning and lubricant changes are high.
- Mobil SHC Cibus 32, 46 and 68 are high performance fluids intended for hydraulic, circulating, compressor and vacuum pump applications
- Mobil SHC Cibus 100, 150, 220, 320 and 460 are intended for gear, bearing and circulating systems
A suitable used oil analysis program, such as Mobil Serv Lubricant Analysis from ExxonMobil, can help monitor the concentration of wear metals and provide information on appropriate actions.
Incidental Food Contact Only per FDA 21CFR 178.3570
Mobil SHC Cibus series lubricants are registered to the requirements of NSF H1 for incidental food contact only which means a limitation of 10ppm oil in food product per FDA 21CFR 178.3570. They are not to be used as direct food contact lubricants.
Specifications and Approvals
This product has the following approvals:
MOBIL SHC CIBUS 32
MOBIL SHC CIBUS 46
MOBIL SHC CIBUS 68
MOBIL SHC CIBUS 100
MOBIL SHC CIBUS 150
MOBIL SHC CIBUS 220
MOBIL SHC CIBUS 320
MOBIL SHC CIBUS 460
Arburg Hydraulic Fluid
X
Halal
X
X
X
X
X
X
X
X
Kosher & Parve
X
X
X
X
X
X
X
X
This product is registered to the requirements of:
NSF H1
X
X
X
X
X
X
X
X
This product meets or exceeds the requirements of:
Canadian Food Inspection Agency Acceptance
X
X
X
X
DIN 51506:2017-08 VDL
X
X
X
X
DIN 51517-2:2018-09
X
DIN 51517-3:2018-09
X
X
X
X
DIN 51524-2:2017-06
X
X
X
X
Eaton 35VQ25 pump test requirements per Brochure No. 03-401-2010, Rev 1
X
X
X
FDA 21 CFR 178.3570
X
X
X
X
X
X
X
X
Properties and Specifications
Property
MOBIL SHC CIBUS 32
MOBIL SHC CIBUS 46
MOBIL SHC CIBUS 68
MOBIL SHC CIBUS 100
MOBIL SHC CIBUS 150
MOBIL SHC CIBUS 220
MOBIL SHC CIBUS 320
MOBIL SHC CIBUS 460
Grade
ISO 32
ISO 46
ISO 68
ISO 100
ISO 150
ISO 220
ISO 320
ISO 460
Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130
1B
1B
1B
1A
1A
1B
1B
1B
Density @ 15 C, kg/l, ASTM D4052
0.843
0.846
0.851
0.839
0.843
0.843
0.854
0.856
FZG Load Carrying Capacity, A/8.3/90, DIN ISO 14635-1
>12
>12
>12
FZG Scuffing, A/8.3/90, Fail Stage, Rating, DIN 51354
>13
FZG Scuffing, Fail Load Stage, A/8.3/90, ISO 14635-1
12
>13
>13
>13
Flash Point, Cleveland Open Cup, �C, ASTM D92
244
244
258
270
226
274
284
294
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445
5.8
7.9
10.4
14.6
20.7
24.5
32.7
43.6
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445
30.7
46.4
67.5
100
162
222
311
458
Pour Point, �C, ASTM D97
-51
-50
-47
-45
-21
-24
-42
-42
Rust Characteristics, Procedure A, ASTM D665
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
Viscosity Index, ASTM D2270
134
140
140
143
150
139
147
148
